Page shortcuts & links:

Stack Motorsport  
Stack Test & Engineering  
Online Enquiry Form  
Manuals & Brochures  
News & Announcements  
Site Map  
Stack RSS  
     

Sensors & Interfaces
 
We offer a comprehensive range of sensors to complement our data acquisition systems...
 
 
Key Features    
 

Stack provide a wide range of sensors and specialist interfaces to meet the vast majority of test and engineering requirements. We only offer sensors that have passed our rigorous testing program, and have proven suitable for test and engineering Applications.

Details of our main sensor types have been listed below:


Solid-state 0-5 Volt Output Sensors
These sensors typically offer 1% accuracy - over their whole operating range - and are ideal for monitoring chassis and engine parameters where Digital Signal Processing is not required.

The range of sensors includes:



Digital Sensors and Interfaces

We manufacture our own range of high precision digital sensors and amplifiers incorporating Digital Signal Processing (DSP) within the sensor.

Used in conjunction with the ST8900 systems these sensors offer unrivalled performance, with up to 15 bit resolution (0.003%) and <0.5% total error over the whole operating range of the sensor.

Furthermore these devices also enable high frequency signals -e.g. 1-2kHz - to be recorded at any sampling frequency down to 1Hz without risk of aliasing errors, and can greatly increase the recording time of the data logging system.

The range of sensors and amplifiers includes:



Resistive Sensors

We also supply a range of automotive spec. pressure, temperature and rotary displacement sensors suitable for measuring basic engine condition and driver inputs.

The range of sensors includes:

 
 
Specifications
Lap Timing System 
ST544 ST543 Infrared Lap Timing System receiver only
ST544 Infrared Lap Timing System trackside beacon only
ST546 Infrared Lap Timing System receiver & beacon
ST918041 Master Beacon Decoder Key
     
Temperature Sensors 
ST464 ST663 -100C to +200C K-Type Thermocouple Amplifier with DSP Interface
ST664 200-1200C 'K' Type Thermocouple Interface with DSP Interface
ST464 200-1200C 'K' Type Thermocouple Interface with Low Freq DSP Interface (for use on Pulse Inputs)
ST761 ST760* 150 ºC Fluid Temp. Sensor (1/8 BSPT)
ST761* Unavailable
ST762* 150 ºC Fluid Temp. Sensor (M10)
ST764* 300 ºF Fluid Temp. Sensor (1/8 NPTF)
ST990 ST990 Air Temp Sensor
ST991 ST991 -20 to 150 deg C temperature sensor (M6x1)
     
Pressure Sensors 
ST452-109 ST452-109 0-5 Bar Absolute Pressure Sensor with Low Freq DSP Interface (0.5% FS Total Error Band over -20C to +80C) Dash-3 Pressure Fitting (e.g. Boost)
ST453 ST453 0-3.5 Bar Absolute Pressure Sensor with Low Freq DSP Interface (1.5% FS Total Error Band over -20C to +80C) 1/8NPT Pressure Fitting (e.g. Boost)
  ST740 0 to 3.5 bar/ 50 psi boost sensor (1/8"NPTF) (replacement only)
ST774 ST741* 0-2 bar Fluid Pres. Sensor (M10)
ST742* 0-30 psi Fluid Pressure Sensor(1/8 NPTF)
ST744* 0-10 bar Fluid Pres. Sensor (M10)
ST745* 0-150 psi Fluid Pres. Sensor (1/8 NPTF)
ST746* 0-150 psi Fluid Pres. Sensor (1/8 BSPT)
ST747 ST747-M10 10 bar/ 150 psi pressure sensor (M10)
ST747-1/8NPTF 10 bar/ 150 psi pressure sensor (1/8 NPTF)
ST747-1/8BSP 10 bar/ 150 psi pressure sensor (1/8 BSPT)
ST747 ST749 Brake pressure sensor (1/8 NPTF)
     
Pulse Sensors
  ST492 Pulse Amplifier (e.g. Gearbox Sensor Amplifier)
  ST669 Magnetic Speed Sensor
ST670 ST670 Proximity Speed Sensor
     
Displacement Sensors 
ST771 ST667 Linear Potentiometer with DSP Interface 150mm/6" (e.g. Suspension)
ST672 Linear Potentiometer with DSP Interface 50mm/2" (e.g. Suspension)
ST673 Linear Potentiometer with DSP Interface 100mm/4" (e.g. Suspension)
ST674 Linear Potentiometer with DSP Interface 200mm/8" (e.g. Suspension)
ST770 ST970 Rotary Potentiometer 120Deg (e.g.Throttle angle)
ST970/483 Throttle Sensor (for spindle w/flat) with low frequency DSP Interface
ST972 ST972 Linear Potentiometer 50mm/2" (e.g. Suspension)
ST973 Linear Potentiometer 100mm/4" (e.g. Suspension)
ST977 Linear Potentiometer 150mm/6" (e.g. Suspension)
ST974 Linear Potentiometer 200mm/8" (e.g. Suspension)
ST975 ST975 250mm/10" String Potentiometer (0-5V output)
ST976 500mm/20" String Potentiometer (0-5V output)
ST975/983 250mm/10" String Potentiometer with DSP Interface
ST976/983 500mm/20" String Potentiometer with DSP Interface
ST978 ST978 Rotary Potentiometer 360Deg (e.g.Steering)
ST779 ST979 Rotary Potentiometer Sensor 120Deg (e.g. pedal angle)
ST979/483 Pedal Angle Sensor with low frequency DSP Interface
     
Force/Acceleration Sensors
ST791 ST791 +/- 5g Accelerometer with 5Hz 5-pole Butterworth Low-pass Filter
ST791/483 +/- 5g Accelerometer with with 5Hz 5-pole Butterworth Low-pass Filter & Low Freq DSP Interface
 
Voltage Sensors
ST983 ST982 +/-1.0V Differential Voltage Interface with DSP Interface
ST983 +/-5.0V Differential Voltage Interface with DSP Interface
ST984 +/-20.0V Differential Voltage Interface with DSP Interface
ST985 +/-5mV output Strain gauge amplifier with DSP Interface, 300 Ohm bridge
ST986 +/-10mV output Strain gauge amplifier with DSP Interface, 300 Ohm bridge
ST987 +/-20mV output Strain gauge amplifier with DSP Interface, 300 Ohm bridge
ST988 +/-50mV output Strain gauge amplifier with DSP Interface, 300 Ohm bridge
 
Miscellaneous Sensors 
  ST483 Low Freq DSP Interface to enable some 0-5Volt sensors to be connected into a digital input
  ST697 HT Ignition Pickup
ST766 ST766 K' Type Thermocouple Probe
  ST767 Rubbing Thermocouple Probe
ST769 -20 to 150 deg C temperature sensor (M6x1)
  ST782 0-200C Infra-red Pyrometer ('K' Type Thermocouple output)
  ST995 5Hz GPS Receiver with NMEA Interface

Note: the sensors above include products from the Stack Motorsport range as well as Test & Engineering

 
 
 
Frequently Asked Questions
If you haven't been able to find the information above then we can offer more help here in our FAQ section. If you are having trouble finding a solution then please contact your dealer who will be happy to assist you.
 
Click
If available
If available

Download Sensor Spec. Sheet

Quick Question - Click Here


Back one page | Specialist interfaces | Test & Engineering Home
go UP

Mobile, rugged, and Harsh Environment test solutions - Stack modular, data acquisition systems.

Stack is a leading supplier of high quality instruments, displays, data acquisition, and video-logging systems to motorsport and harsh environment test solutions with over 25 years of proven experience and service.

  Email: sales@stackltd.com
         
  Products Support Where to buy Stack Information
Stack Ltd.



 

   
Terms & Conditions | Privacy Policy
Copyright © 2008 Stack Limited
Stack is a world-leading supplier of dashboard instruments, data acquisition and video systems to motorsport and automotive customers worldwide.